
The
DS-CH-32-500
is an ideal solution for large scale USB charging
challenges. Compact and durable, each charging
port provides 500 mA of power, a charge that is
comparable to most standard powered USB 2.0
ports.*
Powered by the best-in-class USB technology
of Cambrionix and manufactured in the UK, this
compact and durable station lets you avoid the
need for a large number of dedicated chargers or
USB hub devices and reduces the associated cable
clutter and expense. It was designed for
industrial use and the highest performance
standards and is highly reliable.
It is equipped with a fault indicator to
identify problem devices and each USB port is
protected against ESD, over-voltage and
over-current, meaning that a faulty USB device
cannot damage the charging station and
vice-versa. Devices which consume excess
current are disabled leaving the non-faulty
devices charging.
The DS-CH-32-500
provides stand-alone charging – no PC is
required (unlike most consumer USB hubs),
although it is not a "universal" USB charger.
The
DS-CH-32-500
includes:
 |
a Cambrionix B2 USB charging board; |
 |
upper and lower protection plates; and
|
 |
a manufacturer-specified power supply
suitable for use worldwide (meets Energy
Star standards). |
|
 |
* This is not intended as a universal USB
device charger but it will provide standalone
charging at the 500mA rate for most USB-powered
devices. While it does not support the
fast-charge standards for devices such as iPads,
it will charge them with a trickle charge that
gives overnight charging for most applications
(even if iPads do not display its charge
status). It will also provide a 500 mA
charge to many other USB devices. Some
devices (such as certain cell phones and MP3
players will not charge with this system because
of specific aspects of their charging protocols. Call us
for details.
The DS-CH-32-500 should be used in a
well-ventilated place to promote uninterrupted
service.